Brian W Skellie returns to BMXnet 2023 as a speaker

I am delighted to be speaking and holding workshops at the 17th annual BMXnet event on the 7th to 10th of September 2023. It is a special opportunity to share ideas and techniques with our peers for professional growth. I’m looking forward to the enriching experience with all of you who can participate again!

Updated & New Classes
for BMXnet 2023

Needle Control + Workshop – Thu. 11am-12:30pm on Stage

“Needle control” refers to the precise manipulation and handling of piercing needles during the piercing process. This class focuses on teaching participants how to confidently control the needle’s movement for accurate and controlled piercings, minimizing discomfort for the client. The “workshop” aspect implies that attendees will have the opportunity to engage in practical exercises to improve their needle control skills, potentially using simulators or safe training materials.

Needle Bending & Modification – Thu. 7pm-8:30pm
Needles with Ruben and Brian

This class will be centered around modifying piercing needles to suit specific piercing situations. Needle bending and modification involves altering the angle or shape or the needle tip to accommodate different piercing placements, anatomies, or jewelry styles. This skill can be especially valuable for piercers who encounter unique client needs or want to offer more specialized piercing services.

by: Brian Skellie & Rubén Triguero

Needle Blanks Tips & Tricks Fri. 9am-10:30am

What is a needle blank? The use of needle blanks in disposable piercing technique, how to make tools with them.

Needle blanks are an essential component in the field of body piercing. They are clean, deburred and precisely sized needle tubing without a sharp point, typically made from high-quality stainless steel. These blanks serve as the foundation for creating various types of piercing needles. They play a crucial role in a single use/disposable piercing technique.

The single use/disposable piercing technique has gained popularity due to its emphasis on hygiene and reducing the risk of cross-contamination. In this technique, piercers use sterilized single-use needles and tools, eliminating the need for reprocessing. The needle blanks can come into play in this process, as they allow piercers to customize and create piercing devices to suit different types of piercings, ensuring a more comfortable and accurate piercing experience for the client.

by: Brian Skellie & Rubén Triguero

Open Piercing Workshop – Fri. 4pm-8:30pm

This is an open piercing workshop – if enough attendees want to get pierced, we will have a lot to talk about, demonstrate etc. … so get ready for some hands-on action!

by: Brian Skellie & more

Understanding Materials – Sat. 11am-12:30pm
Body jewelry verification program phase 1 logo.

This class delves into the various materials used in body jewelry, their properties, and their compatibility with different types of piercings and skin sensitivities. Topics will include specifications for metals, polymers, glass, and other materials commonly used in body jewelry, discussing factors like biocompatibility qualities, durability and why standards matter. Includes details about the APP Body Jewelry Verification Program: Phases 1 and 2.

Anodizing is Awesome! #anodizingisawesome – Sat. 4pm-5:30pm

Anodizing Class + Scientastic Demonstration!

Brian Skellie makes it easy for you to anodize your titanium and niobium body jewelry with detailed information and rationale, accompanied by live demonstration and step by step instructions. How can this surface finish process make a difference in your client’s healing results? How can you re-anodize for client jewelry if the color has worn off? These questions and more answered in this class.

Topics covered:

  • How and why to include anodization into your workflow for a cleaner and less reactive surface finish
  • How to offer instant coloration / re-colorization for customers
Anodization Advanced – Sun. 9am-10:30am
Hands-On live anodizing

Anodizing Class + Scientastic Demonstration!

Advanced class is extra paid (50 EUR)

VistaCool direct-to-drain systems

V7601
$999
In stock
1
Product Details
Brand: SciCan
Model: 2000, 5000, 900

Never empty your STATIM condenser bottle again!

VistaCool - the only direct-to-drain system designed from the ground up for your STATIM 2000 and 5000 cassette autoclaves. VistaCool eliminates the need for autoclave condenser bottles by cooling sterilizer wastewater and sending it directly down the drain automatically.

Protect Cabinets

Helps prevent mold, mildew, rot and rust caused by spills and humid environments created by exhaust from condenser bottles.

Protects Drains

Prevents autoclave wastewater from damaging plumbing. Built-in backflow prevention meets or exceeds local plumbing codes..

Protects Staff

Eliminates the need for office staff to empty hot water bottles manually.

Saves Time


Install Anywhere

The innovative design of the new VistaCool 3 provides all the same benefits as its predecessors, while occupying less space. The system’s included mounting clips and pressurized drain line enable it to be installed vertically or horizontally in almost any location.

  • FAST Drains STATIM exhaust safely and automatically.
  • EFFICIENT Eliminates wasted staff time emptying condenser bottle.
  • COST EFFECTIVE Dedicate more resources to patient care and less on maintenance

SciCan VistaCool Sophisticated wax motor allows cold water into the system ONLY when the sterilizer is in use.

FEATURES
UNIVERSAL SYSTEM
VistaCool will work with the STATIM 2000 or 5000 and other select sterilizers.
ROBUST
System will continuously cool your STATIM’s hot exhaust and drain it safely – no matter how many cycles you run.
VALIDATED
VistaCool is the only direct-to-drain product designed to safely and effectively drain the steam exhaust from a STATIM 2000 or 5000 and other select sterilizers.

SMART DESIGN
Triangular water tank is shaped to take up less space under your sink. Double unit services two sterilizers. No counter drilling or air gap (in most cases).

COMPLIANT
All components and system set-up are compliant with most regional plumbing codes.

COMPATIBLE
Can be used with all drainage pipe material types.
ECO DESIGN
Water tank is made of recycled plastic material.
EASY TO USE
No consumable parts and no daily maintenance is required.

Over the last 20 years, the STATIM cassette autoclave is one of the quintessential innovations in sterilization technology and enjoys leadership in the body art, dental and ophthalmology markets in over 90 countries. Designed to sterilize in a fraction of the time compared to traditional autoclaves, the STATIM reduced the quantity of expensive instruments needed.

To enhance the STATIM functionality, SciCan is proud to introduce the latest innovation to the STATIM brand: the VistaCool. The VistaCool is a direct-to-drain system whereby the STATIM is connected directly to the office or clinic plumbing. What this means is, rather than the STATIM unit draining into the external drainage bottle, the STATIM can now vent the used sterilization water directly down the main office drain.

There are many benefits of venting the STATIM unit directly down the drain, most notably saving time and increasing office efficiency. The VistaCool will save time, as a staff person will no longer be responsible for regularly emptying the bottle.

The VistaCool uses cold city water to cool the steam quickly and efficiently. The thermal sensor only activates when the system is in use, so water is only used when it’s needed. The built-in safety feature prevents the system from overheating and damaging office cabinetry.

Specifications

V7501 V7502 V7601
Tank Material Polyethylene – Gray Gray ABS Tank, PVC End Caps
Tank Dimensions 10.75" W x 5.75" L x 13.75" H 4.0" W x 13.0" L x 17.0" H 3.5" Diameter x 15.0" L
Tank Volume 1.50 Gallons / 5.70 Liters 3.00 Gallons / 11.40 Liters 0.37 Gallons / 1.40 Liters
Tank Weight (w/ water & Fittings) 15.0 lbs. / 6.8 kg 28.0 lbs. / 12.7 kg 5.0 lbs. / 2.3 kg
Coolant Water Connection Supply fittings for 1/4" O.D. feed tubing included.
Drain/Wastewater Connection Drain tee with fittings included. Not included.
Max Coolant Water Pressure 100 psi / 6.9 bar
Max Altitude (If using Air Gap) 6,561 feet / 2000 meters

Download

Brochure

Save this product for later

FREE for those who purchased their Anodizer or STATIM from Brian through Piercers.com or Statim.us, and includes membership to Brian’s anodization training group.

Advanced Anodizing Techniques for Body Jewelry

Scientastic live demonstration!

Advanced class is paid or free for those who purchased their anodizer from Brian, and includes membership to a private professional anodizing forum full of videos, photos and expert user advice and detailed educational guide and color chart as a PDF download.

*Discounted for current anodizer owners and those who have already attended one of Brian’s previous Anodizing workshops

Piercing Techniques + Hands-On Live Piercing

This class covers a comprehensive range of piercing techniques, including discussion of sterilization, placement considerations, and proper procedures for different types of piercings. The “hands-on live piercing” component indicates that participants will have the opportunity to observe or participate in actual piercing procedures under the guidance of an experienced instructor. This type of interactive learning helps aspiring piercers gain practical skills in a controlled environment.

Upcoming 
Events

See you soon!
See you soon!

Share what you think

This site uses Akismet to reduce spam. Learn how your comment data is processed.