I am delighted to be speaking and holding workshops at the 17th annual BMXnet event on the 7th to 10th of September 2023. It is a special opportunity to share ideas and techniques with our peers for professional growth. I’m looking forward to the enriching experience with all of you who can participate again!
Updated & New Classes
for BMXnet 2023
Needle Control + Workshop – Thu. 11am-12:30pm on Stage
“Needle control” refers to the precise manipulation and handling of piercing needles during the piercing process. This class focuses on teaching participants how to confidently control the needle’s movement for accurate and controlled piercings, minimizing discomfort for the client. The “workshop” aspect implies that attendees will have the opportunity to engage in practical exercises to improve their needle control skills, potentially using simulators or safe training materials.
Needle Bending & Modification – Thu. 7pm-8:30pm
This class will be centered around modifying piercing needles to suit specific piercing situations. Needle bending and modification involves altering the angle or shape or the needle tip to accommodate different piercing placements, anatomies, or jewelry styles. This skill can be especially valuable for piercers who encounter unique client needs or want to offer more specialized piercing services.
by: Brian Skellie & Rubén Triguero
Needle Blanks Tips & Tricks Fri. 9am-10:30am
What is a needle blank? The use of needle blanks in disposable piercing technique, how to make tools with them.
Needle blanks are an essential component in the field of body piercing. They are clean, deburred and precisely sized needle tubing without a sharp point, typically made from high-quality stainless steel. These blanks serve as the foundation for creating various types of piercing needles. They play a crucial role in a single use/disposable piercing technique.
The single use/disposable piercing technique has gained popularity due to its emphasis on hygiene and reducing the risk of cross-contamination. In this technique, piercers use sterilized single-use needles and tools, eliminating the need for reprocessing. The needle blanks can come into play in this process, as they allow piercers to customize and create piercing devices to suit different types of piercings, ensuring a more comfortable and accurate piercing experience for the client.
by: Brian Skellie & Rubén Triguero
Open Piercing Workshop – Fri. 4pm-8:30pm
This is an open piercing workshop – if enough attendees want to get pierced, we will have a lot to talk about, demonstrate etc. … so get ready for some hands-on action!
by: Brian Skellie & more
Understanding Materials – Sat. 11am-12:30pm
This class delves into the various materials used in body jewelry, their properties, and their compatibility with different types of piercings and skin sensitivities. Topics will include specifications for metals, polymers, glass, and other materials commonly used in body jewelry, discussing factors like biocompatibility qualities, durability and why standards matter. Includes details about the APP Body Jewelry Verification Program: Phases 1 and 2.
Anodizing is Awesome! #anodizingisawesome – Sat. 4pm-5:30pm
Anodizing Class + Scientastic Demonstration!
Brian Skellie makes it easy for you to anodize your titanium and niobium body jewelry with detailed information and rationale, accompanied by live demonstration and step by step instructions. How can this surface finish process make a difference in your client’s healing results? How can you re-anodize for client jewelry if the color has worn off? These questions and more answered in this class.
Topics covered:
- How and why to include anodization into your workflow for a cleaner and less reactive surface finish
- How to offer instant coloration / re-colorization for customers
Anodization Advanced – Sun. 9am-10:30am
Hands-On live anodizing
Anodizing Class + Scientastic Demonstration!
Advanced class is extra paid (50 EUR)
StatClave G4
*(120V) Wifi enabled, waste water direct to drain included
This changes everything. Again.
Introducing the STATCLAVE™ Chamber Autoclave
With the reliability and trust you’ve come to expect from STATIM, the STATCLAVE G4 is designed to deliver speed, capacity and efficiency to your practice. STATCLAVE is a Class B vacuum sterilizer that incorporates both pre-sterilization vacuum to improve steam penetration and post-sterilization vacuum to improve drying. Its 11” chamber and vacuum-assisted closed-door drying efficiently delivers sterilized and dried wrapped instruments.
Fast
STATCLAVE can efficiently sterilize and dry wrapped instrument loads in as little as 38 minutes.
Dry
Closed-door drying and vacuum technology results in perfectly dried instruments every time.
G4 Technology
SciCan’s G4 equipment can connect and send information to your smart devices or computer so you can have cycle data, instructions, and maintenance notifications at your fingertips.
Capacity
STATCLAVE’s 11” chamber can sterilize up to four full-size cassettes and 4 exam cassettes or 20 pouches with included pouch racks.
Versatile
STATCLAVE offers a number of filling & draining options, including easily accessible and cleanable top reservoirs, front manual fill and a rear automatic fill option that can be connected to the VistaPure water filtration system for automated filling.
Gentle
Fresh water is used in every cycle, reducing the buildup of oils and debris.
STATCLAVE G4 Chamber Autoclave
Featuring the STATCLAVE G4 Chamber Autoclave for sterilizing dental instruments.
STATCLAVE G4 Launch at PDC 2019
Ted Gray and Melissa Summerfield discuss the latest innovation from SciCan, the STATCLAVE G4 Chamber Autoclave.
STATCLAVE G4 In-Service
Cycle Times and Maximum Load Weights (120v)
| Cycles |
Temperature / Time |
Cycle Times* |
Maximum Load Weight |
| STATCLAVE G4 |
|||
|---|---|---|---|
| Solid Unwrapped |
270°F (132°C) / 4 mins |
18 mins |
13.2 lbs (6 kg) |
| Solid Wrapped |
270°F (132°C) / 4 mins |
44 mins |
13.2 lbs (6 kg) |
| Hollow Unwrapped |
270°F (132°C) / 4 mins |
23 mins |
13.2 lbs (6 kg) |
| Hollow Wrapped |
270°F (132°C) / 4 mins |
50 mins |
13.2 lbs (6 kg) |
| Textiles/Porous |
270°F (132°C) / 4 mins |
49 mins |
4.4 lbs (2 kg) |
| Rubber & Plastic |
250°F (121°C) / 20 mins |
36 mins |
4.4 lbs (2 kg) |
*Cycle time will vary depending on instrument load.
Unit Specifications
| STATCLAVE G4 |
|
|---|---|
| Unit size (L x W x H)† |
25” x 17.75" x 19.5" / 635 x 450 x 495mm |
| Volume |
6.87 gal (26 L) |
| Chamber Dimensions (D x L) |
11" diameter, 15" depth / 297 x 381mm |
| Weight |
61.6 kg (135.8 lbs) (without water and packaging) |
| Voltage |
120V, 60Hz, 12 A |
†On the right side, allow 2” (50mm) of space for ventilation. Allow for at least 7” (180mm) above unit to enable access to reservoirs. If less than 7” (180mm), screw on hinges can be removed to allow reservoir lid to slide in and out of position.
Download
Brochure
STATCLAVE G4
Operator Manual
STATCLAVE G4 Quick Reference Guide
Save up to 35% off the list price of a StatClave autoclave when you use your Section 179 tax deduction: Click here for more info
FREE for those who purchased their Anodizer or STATIM from Brian through Piercers.com or Statim.us, and includes membership to Brian’s anodization training group.
Advanced Anodizing Techniques for Body Jewelry
Scientastic live demonstration!
Advanced class is paid or free for those who purchased their anodizer from Brian, and includes membership to a private professional anodizing forum full of videos, photos and expert user advice and detailed educational guide and color chart as a PDF download.
*Discounted for current anodizer owners and those who have already attended one of Brian’s previous Anodizing workshops
Piercing Techniques + Hands-On Live Piercing
This class covers a comprehensive range of piercing techniques, including discussion of sterilization, placement considerations, and proper procedures for different types of piercings. The “hands-on live piercing” component indicates that participants will have the opportunity to observe or participate in actual piercing procedures under the guidance of an experienced instructor. This type of interactive learning helps aspiring piercers gain practical skills in a controlled environment.
Upcoming
Events
- BMXnet 7th – 10th September 2023
- UKAPP 24th – 26th September 2023
- AUPP 23rd – 25th October 2023
- Needles : The Cutting Edge
- Anodizing is Awesome!
- Panel Discussion with Luis Garcia and Ryan Ouellette
- APP-PT 1st – 4th November 2023
- Needles : The Cutting Edge
- A rising tide lifts all boats
- Understanding Materials
