Check out the new STATCLEAN from SciCan for an effective and safe and quieter ultrasonic option
There are a lot of useful infection control devices out there. I just reviewed the MULTIsteril automated ultrasonic washer by Tecno-Gaz. It is NOT a sterilizer like the name might imply but it IS an automatic ultrasonic that fills, adds detergent, degases the solution, then ultrasonically cleans, rinses and dries items. Kind of like an even smaller Hydrim C61WD G4 by SciCan, but with a few distinct differences.
Both prepare instruments for sterilization with automated wash, rinse and dry processes. The Hydrim uses high impingement jets of flowing alkaline detergent, whereas the MULTIsteril uses an ultrasonic bath.
In comparison, the Hydrim C61WD G4 is a more thorough process and better value overall.
It is nice to have another automatic option to fill the gap for body artists between manual cleaning, ultrasonic and Hydrim automated washers. They are both in the same price range, and the https://piercers.com/ and in the US at https://statim.us/
Automated ultrasonic 
Visible open: ultrasonic bath, liquid dosing and heating coil in lid 
Steps used by this ultrasonic cleaner 
Hydrim automated washers
Resources:
- Another option for cleaning was the Hygea line from ULTRAWAVE.
Not fully automated, but a significant step up from the common benchtop ultrasonic. - L&R are moving in the right direction with Effica lockable covers.
- Coltene/Whaledent sells a few decent models as well such as the UC150 and UC300
- Crest does not have any with locking or well sealed lids, as far as I know. I don’t suggest making do with shower caps.
VistaPure AutoFill
VistaPure AutoFill
VistaPure’s patented AutoFill accessories replenish SciCan STATIM®and BRAVO™ autoclaves with distilled-quality water automatically — enabling truly hands-free convenience.
VistaPure AutoFill accessory kits work with all VistaPure systems and can be installed easily on any STATIM 2000/G4 or STATIM 5000/G4, or any BRAVO autoclave, in just a few minutes!
- No more purchasing and storing distilled water
- No more cycle-fault errors caused by forgetting to fill reservoirs
- No more spills while filling autoclaves manually
- No more staff time spent filling autoclaves = more time with patients
VistaPure AutoFill Installation
A 12-foot length of clear polyurethane tubing is already attached to the AutoFill manifold. If the desired distance between the connection to the VistaPure and the autoclave is greater than 12 feet, simply order a longer length of the clear polyurethane tubing, as the distance from the VistaPure to the autoclave is not limited, except by the feed tubing.
Installing AutoFill on a STATIM
The VistaPure AutoFill for STATIM device (S3020) can be installed on any STATIM 2000/G4 or STATIM 5000/G4 autoclave as follows:
https://www.scican.com/us/media/water-management/SD-491_US_EN%20R1_Autofill_Sell%20Sheet_20160805_PRNT.pdfInstalling AutoFill on a BRAVO
The VistaPure AutoFill for BRAVO device (S3030) can be installed on any model BRAVO autoclave.
In order to connect the VistaPure AutoFill to the BRAVO, one of the two tanks that come with the BRAVO must be selected as a “relay tank” since the BRAVO system uses a suction-lift pump to fill its reservoir when in its automatic-filling mode. Note that the relay tank must be located within 6 feet of the BRAVO unit, due to the suction-lift capacity of the BRAVO pump.
