Automated ultrasonic review

Check out the new STATCLEAN from SciCan for an effective and safe and quieter ultrasonic option


There are a lot of useful infection control devices out there. I just reviewed the MULTIsteril automated ultrasonic washer by Tecno-Gaz. It is NOT a sterilizer like the name might imply but it IS an automatic ultrasonic that fills, adds detergent, degases the solution, then ultrasonically cleans, rinses and dries items. Kind of like an even smaller Hydrim C61WD G4 by SciCan, but with a few distinct differences.

Both prepare instruments for sterilization with automated wash, rinse and dry processes. The Hydrim uses high impingement jets of flowing alkaline detergent, whereas the MULTIsteril uses an ultrasonic bath.

In comparison, the Hydrim C61WD G4 is a more thorough process and better value overall.

It is nice to have another automatic option to fill the gap for body artists between manual cleaning, ultrasonic and Hydrim automated washers. They are both in the same price range, and the https://piercers.com/ and in the US at https://statim.us/


Resources:

  • Another option for cleaning was the Hygea line from ULTRAWAVE.
    Not fully automated, but a significant step up from the common benchtop ultrasonic.
  • L&R are moving in the right direction with Effica lockable covers.
  • Coltene/Whaledent sells a few decent models as well such as the UC150 and UC300
  • Crest does not have any with locking or well sealed lids, as far as I know. I don’t suggest making do with shower caps.

VistaCool Adjustable Tank Stand

vcstand
$139
In stock
1
Product Details
Brand: SciCan
Model: 2000, 5000, 900

How to Use the Adjustable Tank Stands

Adjustable tank stands for installing the VistaCool at the correct height are available as accessories when needed (S7545 for use with single-unit V7501; S7547 for use with double-unit V7502). These stands raise the tank height between 1/2” and 5” in 1/2” increments.

Instructions

  1. Measure to determine how much additional height is required for the top of the VistaCool water tank to be above the coolant overflow fitting on the drain adapter assembly. Be sure the top of the tank is below the autoclave outlet
  2. Select the appropriate orientation for the adjustable tank stand. Note that because of how the openings in the stands are positioned, one orientation raises the water tank in even, one-inch increments (1”, 2”, etc.). Use the inverted orientation if you need to raise the tank in a 1/2” increment (1/2”, 1-1/2”, 2-1/2”, etc.)
  3. Insert the included metal “straps” into the appropriate openings to achieve the correct height. Be sure that the tank sets level and securely in the tank stand.
Save this product for later

Share what you think

This site uses Akismet to reduce spam. Learn how your comment data is processed.