Check out the new STATCLEAN from SciCan for an effective and safe and quieter ultrasonic option
There are a lot of useful infection control devices out there. I just reviewed the MULTIsteril automated ultrasonic washer by Tecno-Gaz. It is NOT a sterilizer like the name might imply but it IS an automatic ultrasonic that fills, adds detergent, degases the solution, then ultrasonically cleans, rinses and dries items. Kind of like an even smaller Hydrim C61WD G4 by SciCan, but with a few distinct differences.
Both prepare instruments for sterilization with automated wash, rinse and dry processes. The Hydrim uses high impingement jets of flowing alkaline detergent, whereas the MULTIsteril uses an ultrasonic bath.
In comparison, the Hydrim C61WD G4 is a more thorough process and better value overall.
It is nice to have another automatic option to fill the gap for body artists between manual cleaning, ultrasonic and Hydrim automated washers. They are both in the same price range, and the https://piercers.com/ and in the US at https://statim.us/
Automated ultrasonic 
Visible open: ultrasonic bath, liquid dosing and heating coil in lid 
Steps used by this ultrasonic cleaner 
Hydrim automated washers
Resources:
- Another option for cleaning was the Hygea line from ULTRAWAVE.
Not fully automated, but a significant step up from the common benchtop ultrasonic. - L&R are moving in the right direction with Effica lockable covers.
- Coltene/Whaledent sells a few decent models as well such as the UC150 and UC300
- Crest does not have any with locking or well sealed lids, as far as I know. I don’t suggest making do with shower caps.
VistaBrite Replacement Carbon Prefilter
VISTABRITE™ water treatment system
Making ordinary water . . . extraordinary!
Features
- Specifically designed to filter water used in today’s medical and dental instrument washers
- Completely non-electric – operates on city water pressure
- Reduces water contamination in wash water by as much as 95%
- Reduces total dissolved solids, chlorides and traces of iron
- Features proprietary ThermoBlend™ technology for quicker cycle times
- Installs quickly without tools
Why do I need water treatment?
The VISTABRITE is a highly specialized filtration system that reduces the contaminants found in water that can negatively impact the finish of instruments processed in instrument washers. Reduction of these contaminants also greatly reduces spotting and the maintenance required to keep the internal surfaces and working parts of instrument washers clean.
How it works
Water enters the system and is first filtered by the prefilter to remove small sediment and water treatment chemicals like chlorine. The water then moves through the hyperfiltration membrane where the TDS is reduced by as much as 95%. The level of contaminant reduction is totally dependent upon the input water pressure, contamination level and input water temperature. Higher input water pressure results in higher output water quality and pressure.
Installation
VistaBrite and Thermoblend are trademarks of Vista Research Group, LLC. VistaBrite is manufactured by Vista Research Group, LLC.
Contact us to get a new VistaBrite
Accessories
| Part number | Description | ||
| R4151 | Replacement Carbon Prefilter | ||
| R4155 | Replacement Hyperfiltration Filter | ||
| S9117 | TDS/Temp Meter- Hand Held w/ Case | ||