Nick completed his Masters degree at the Ohio State University in Somatic and Cultural Studies in 2002. His final project, “Somatic Piercing: The Art and Ritual of Body Piercing” portrays his experiences in body rituals as well as illuminates other piercers’ views on the matter.
“This article presented some sound information, but there’s still much more to know. When piercings are performed by a trained professional using sterile equipment and high quality jewelry, and appropriate aftercare is followed, the risks are drastically minimized.” — Elayne Angel, APP President
You are a pierced woman, he said, looking into my eyes and smiling. I lifted my head so that I could take a peek: Brian Skellie, my piercer, had successfully stabbed me with a needle so I could wear a silver ring with a hematite stone on my navel.
In light of a number of high-profile recalls of contaminated alcohol prep products in the last several years, the Food and Drug Administration (FDA) is currently weighing whether or not to require sterility of patient skin prep products, specifically items such as alcohol prep pads used for injections, but it is not ruling out other surgical prep products.
On Dec. 12, 2012, the FDA held a hearing to receive expert testimony and public comment on how to address microbial contamination of these patient preoperative skin preparation drug products. It is a step in the ongoing investigational process that the agency is undertaking to determine issues related to sterility impacted by manufacturing processes.
An FDA spokesperson says that the panel members and FDA’s working group have received the submissions from the hearing and have been deliberating. FDA’s working group will be ready to make new recommendations in the coming months. The spokesperson adds that FDA’s working group has been soliciting clinician feedback from the FDA’s federal partners and other public health organizations, and that the agency will be ready to make new recommendations in the coming months.
Currently, patient preoperative skin preparations are not required to be sterile, since bacteria can contaminate these products at the time of manufacture or during product use. But because contaminated patient preoperative skin preparations have been associated with clinical infections and adverse outcomes, the FDA is exploring certain scientific and product-use issues related to patient preoperative skin preparations.
Patient preoperative skin preparations are over-the-counter (OTC) topical antiseptic drug products used to reduce the number of bacteria on the skin prior to medical procedures or injections. Although they are marketed predominantly to healthcare facilities, the use of these products extends beyond the healthcare facility setting.
Neither are surgical implant materials. These are engineering specifications. *AISI and SAE do not establish standards for biocompatibility.
More detail: ASTM ? ANSI ? ISO ?
One thing to know is that ISO and ASTM are both international organizations for standards, but ISO is restricted to members of national standards bodies such as ANSI. Individuals or companies cannot become ISO members.
ASTM members are comprised of representatives of both government and stakeholders in related business, such as me. I joined ASTM in the mid 1990’s to represent the needs and learn more about the responsibilities of the body piercing business, and have been able to attend conferences, contribute my research based evaluations and vote for standards that affect us as body artists.
ISO voting is done for the USA by ANSI. ASTM makes recommendations to ANSI. ANSI has typically voted in accordance with the recommendations of the ASTM.
ASTM F04 and ISO TC 150 have merged to facilitate the flow of information.
The 2013 update that my ASTM F04.12 committee just voted to approve for the most common steel alloy for surgical implant is also most the commonly used for body jewelry, F138.
ASTM F138-13a specifies chemical, mechanical and metallurgical refinements for 316 series steel alloys for surgical implant. It doesn’t really matter if the material is 316L, 316LVM, etc. The material is only acceptable for body jewelry when specified for human surgical implant and validated for this purpose to a peer reviewed scientific standard such as ASTM or ISO provides. AISI/SAE
As an aside: I don’t personally use steel alloy jewelry for initial piercings. I prefer pure unalloyed metals or simpler alloys with a greater margin of safety and less reactivity in the body.
My company Piercers.com and I are pleased to sponsor a Statim autoclave for sterilization at this year’s event again! I will be there to educate and to learn, as well as to sell infection control equipment and anodizers. The Statim 2000 G4 is on the way, and the new Optim 33TB Blue version for surface disinfection as well. — at Unperfekthaus for the BMXnet … Read more Sponsorship for BMXnet 2013 infection control
I strongly suggest that my fellow piercers discontinue the use of any caps applied manually after piercing, especially two handed capping methods, which appear most likely to result in sharps injury.
OSHA considers recapping of needles unacceptable risk unless there are no alternatives. OSHA allows one handed capping, such as spearing the needle tip into a stopper on your work tray, or using a mechanical device such as a tweezer or clamp to apply the cap providing a safe distance from the sharp end. Even using a receiving tube can pose risks if the tube a small diameter or not sufficiently puncture resistant.
When piercing without a clamp, longer needles allow the tube to be held securely far away from the tip once it has passed through the body. I use 3 inch needles for all body piercings so that the sharp end can be cleared far enough from the pierced area and the tube can be secured close to the blunt base without the need to manipulate the sharp end.
The stylet approach is stable, and based on existing self-blunting sharps technology. Provided that the wire is the appropriate size, the sharp is secured and there is not a cutting edge to catch or stick. It will only move back in the needle with a similar level of force that would puncture through a cork or plastic tube. A telescoping metal tube with a reduction to catch the needle could be more secure, and I’m working on a demonstration of that as well.
This is a prototypical demonstration of the concept and a version of it can be made to fit into needles for our industry with a number of locking and blunting variations of the same strong passivated 304 steel as the needles.
Contaminated needles and other contaminated sharps shall not be bent, recapped, or removed except as noted in paragraphs (d)(2)(vii)(A) and (d)(2)(vii)(B) below. Shearing or breaking of contaminated needles is prohibited.
Contaminated needles and other contaminated sharps shall not be bent, recapped or removed unless the employer can demonstrate that no alternative is feasible or that such action is required by a specific medical or dental procedure.
CONFERENCE IS ALMOST UPON US! THE CONFERENCE ADVANCED (ONLINE) REGISTRATION WILL SHUT DOWN AT MIDNIGHT ON MAY 17TH, PST ANY CHANGES TO YOUR REGISTRATION SHOULD BE MADE BEFORE THEN (OR WILL HAVE TO WAIT UNTIL WE ARE ONSITE IN LAS VEGAS) BANQUET DINNER SPONSORED BY INDUSTRIAL STRENGTH BODY JEWELRY; ANATOMETAL, INC.; LEROI, INC.; AND KAOS SOFTWEAR THURSDAY JUNE … Read more APP Conference soon!
The Association of Professional Piercers is an international non-profit organization dedicated to the dissemination of vital health and safety information about body piercing to piercers, health care professionals, legislators, and the general public. Socially and legislatively, body piercing is situated within the greater body modification community. As a result, we recognize that our role extends beyond the discipline of body piercing. Our position on body art practices such as tattooing, cosmetic tattooing, branding, scarification, suspension, and other forms of body modification is as follows:
What Titanium materials are best for body jewelry? My articles at https://jewelry.piercing.org/ and https://brnskll.com/shares/titanium-standards-why-not-g23/ explain that the two most effective Titanium standards are alloyed ASTM F136 and pure ASTM F67, the most common being the former as it is stronger, harder and easier to polish. Both are used for permanent surgical implants.
Equipment must be cleaned before sterilization. Heat fixes blood fibrin to instrument surfaces, and should not be used prior to cleaning. Reprocessing should be done according to evidence based scientific recommendations.
Have you noticed some sort of raised bump at the exit point of your piercing?
This could be due to a number of sources of irritation or infection that can result in overgrowth of scar tissue when the healing process is disrupted. There may be a single, simple solution though it commonly may take a combination of protective measures to help this turn out well.
Whoso would be a man must be a nonconformist. He who would gather immortal palms must not be hindered by the name of goodness, but must explore if it be goodness. Nothing is at last sacred but the integrity of your own mind. Absolve you to yourself, and you shall have the suffrage of the world. — “Self Reliance,” Ralph Waldo Emerson
You may find this conversation interesting or useful as a colleague if you are on the fence about joining the Association of Professional Piercers.