OPTIM 33TB protocol

OPTIM 33 TB is a One-Step Cleaner Disinfectant with no hazardous ingredients.

For the modern body artist, OPTIM offers a number of advantages for cleaning and thorough and safe disinfection in one minute for:

  • Temperature sensitive Body jewelry materials for healed piercings
    Such as wood, horn, stone, bone, certain polymers
    Break the chain of infection for MRSA, VRE, HCV, HBV, HIV, Mycobacteria and other pathogens for non-critical items that can not withstand the heat of an autoclave. 
  • Tattoo machine frames, coils, springs, clip cords
  • Mayo trays and other work surfaces
  • Exam tables, massage tables, tattoo chairs
  • Display cases
  • Furniture in your waiting area including fabric covered items.
  • Suspension rigs and equipment

OPTIM 33 TB Quick Reference Guide

SWITCHING TO OPTIM 33 TB

Give all surfaces a rinse with mild soap & water before switching to OPTIM.

QUATs (Quaternary Ammonium Compounds) or phenol based disinfectants are common active ingredients in the dental operatory today and are known to leave residual active chemistry on surfaces. AHP (Accelerated Hydrogen Peroxide) is an oxidizer and will remove chemical residues left by other surface disinfectants. There may be odor or film development if surfaces are not rinsed (damp wiped) properly with soap & water. This odor or film should however dissipate on average within 7 to 10 days of continual use as AHP will remove the residual active ingredient.

Surfaces need to be periodically rinsed with water!

Dissents or complaints happen when users are not informed on the correct protocol when using the product. It is good practice to periodically (at least once a week) rinse or wipe surfaces with a damp cloth to remove surfactants (detergents) or residual active ingredients that can build up over time with the use of ANY disinfectant cleaner.

No mixing of chemistries! Mixing of chemistries in operatory i.e. using quats-alcohol/phenol disinfectant and OPTIM 33 TB in the same operatory or refilling OPTIM into chemical container used previously for other chemicals is not recommended. It is best practice to never mix chemistries (any kind) no matter what industry you are in.

On which surfaces can OPTIM 33 TB be used?

Non-porous hand contact environmental surfaces including Naugahyde (vinyl coated upholstery fabric).

NOTE: Soft surfaces such as chairs and cables should be periodically rinsed with water or wiped with a damp cloth to prevent the build-up of disinfectant or surfactants. As best practice, for any kind of disinfectant or cleaners used, chairs should be wiped with a damp cloth at the end of the day or at least once a week.

PRECAUTIONS:

  • Surfaces that are composed of brass or copper, or other ferrous metals may show signs of discoloration or pitting with prolonged exposure.
    This will not usually affect body jewelry for healed piercings made of such materials after a single cleaning and disinfection process.
  • Anodized aluminum (often used on tattoo machine frames, hand-pieces, suspension rigs) and carbon tipped instruments should be avoided (i.e. burrs). Material impact can be reduced with rinsing or damp wiping.
  • We advise against wrapping gauze pad or ‘sleeves’ soaked in disinfectant on jewelry, tattoo machine frames, or hand-pieces.

OPTIM 33 TB – One Step Disinfectant Cleaner

Surface Disinfection Protocol

OPTIM 33 TB Solution

Spray – Wipe – Spray Protocol

Visibly Soiled Surface – Clean before disinfecting

  1. Spray OPTIM 33 TB directly onto Stat-Wipes or clean paper towel surface.
  2. Wipe visible soil with Stat-Wipes or clean paper towel to clean surface.
  3. Discard soiled towelette.
  4. Continue to disinfection step

Visibly Clean Surface – Disinfect pre-clean surface

  1. Spray OPTIM 33 TB to cover the pre-clean surface. Allow the disinfectant to remain undisturbed on the surface for the contact time indicated on the label.

    [Always spray wipes not the surface.]

  2. *Do not overspray as this can create pooling of liquid. OPTIM 33 TB is water based not alcohol based.
  3. Wipe with Stat-Wipes or clean paper towel.
  4. Discard used towelette.

*Using gauze dipped in solutions for wiping can cause pooling of liquid on surface. Wipe surface dry with paper towel if surface is still wet after desired contact time is achieved.

** OPTIM 33 TB has been tested in accordance with EPA organic soil load requirement as a One-Step Cleaner Disinfectant. Therefore, OPTIM can be used on visibly clean surface. Depending on the soil load on the surface, the 2 step process is not required due to this EPA claim.

OPTIM 33 TB premium one-step cleaner disinfectant wipes.
Shown: A demonstration of how effective OPTIM wipes are compared to other products for cleaning dried blood.

OPTIM 33 TB Wipes

Standard Protocol for Visibly Soiled Surface

Clean before disinfecting

  1. Pull out OPTIM 33 TB towelette from the canister.
  2. Clean surface with towelette to remove organic matter or visible blood.
  3. Discard used towellete.

Disinfect After Cleaning

  1. Pull out OPTIM 33 TB towelette from the canister.
  2. Disinfect surface with towelette
  3. Allow surface to remain wet for the recommended contact time.
  4. Discard used towelette.

** OPTIM 33 TB has been tested in accordance with EPA organic soil load requirement as a One-Step Cleaner Disinfectant. Depending on the soil load on the surface, users have the choice of cleaning the surface with one side of the wipe and disinfecting the surface with the reverse side of the wipes. Always allow surface to remain wet for the recommended contact time.

Because OPTIM 33 TB is approved as a One-Step Cleaner Disinfectant, depending on the soil load, the 2 step process may not be required due to this EPA claim.

SciCan_OPTIM_Blue_banner

Optim Blue Protocol:

OPTIM® BLUE Quick Reference Guide (download PDF)Optim Blue wipes qrg

Optim Blue spray qrg

4 thoughts on “OPTIM 33TB protocol”

Share what you think

This site uses Akismet to reduce spam. Learn how your comment data is processed.